30mm Blind Shaker Riser for Baratza Encore ESP | Dosing Cup Stand

Bring your dosing cup or blind shaker 30 mm closer to the grind chute while maintaining a clean, integrated look with your Baratza Encore ESP.

The Grind to Brew Co. 30mm Blind Shaker Riser is designed to fit snugly into the same compartment as the original Baratza grounds bin. It raises your receiving cup by 30 mm (1.18 in), reducing the open space between the cup and the grinder's coffee exit.

But this isn't simply a block that raises your cup.

The riser was designed around the shape and curvature of the Baratza Encore ESP, giving it an integrated appearance that follows the grinder's original design.

A Snug, Purpose-Built Fit

Remove the original grounds bin and place the riser directly into the bin compartment.

The riser is shaped to fit snugly in the original bin location, helping keep the platform securely positioned while grinding.

The top of the riser incorporates a recessed cup bed designed to help locate the receiving cup and prevent it from sliding around during grinding.

No permanent modifications, hardware, or tools are required.

Fixed 30mm Rise

Every version provides the same 30 mm (1.18 in) lift.

This brings your blind shaker or dosing cup closer to the grind chute while maintaining enough space to easily place and remove the receiving container.

Choose From 3 Versions

Version 1 — Original Baratza Cup

Designed specifically for the original receiving cup supplied with the grinder.

The recessed bed helps locate the original cup and keep it securely positioned beneath the grind chute.

Version 2 — Large Cup / Blind Shaker

Designed for larger aftermarket dosing cups and blind shakers measuring up to approximately 3 in (76 mm) wide.

The larger recessed bed provides a stable position for compatible cups while maintaining the same 30 mm rise.

Version 3 — Dual Cup

One riser designed for both setups.

The top incorporates indentations for both the original Baratza cup and compatible cups up to approximately 3 in (76 mm) wide, giving you the flexibility to switch between containers without changing risers.

Designed to Match the Grinder

Function was only part of the design.

The exterior profile follows the curvature and styling of the Baratza Encore ESP, helping the riser look like a natural part of the grinder rather than an unrelated platform placed underneath your cup.

It's an original Grind to Brew Co. design created specifically around the Encore ESP and refined for a precise, practical fit.

Features

• Raises your cup exactly 30 mm (1.18 in)

• Designed specifically for the Baratza Encore ESP

• Fits snugly into the original grounds-bin compartment

• Recessed cup bed helps prevent movement while grinding

• Follows the curvature and profile of the grinder

• Three cup-compatibility versions available

• Works with the original Baratza receiving cup

• Large-cup version accommodates compatible cups up to approximately 3 in (76 mm) wide

• Dual version accommodates both cup styles

• No permanent grinder modification required

• No tools or hardware required

• Original Grind to Brew Co. design

• 3D printed

Material & Care

This product is 3D printed and should be cared for accordingly.

Clean with a soft, damp cloth or hand wash with cool or lukewarm water and mild soap when necessary. Do not place in the dishwasher, microwave, or expose to boiling water.

Keep away from open flames, hot surfaces, and other sources of excessive heat. Allow the product to dry completely before returning it to your coffee setup.

Due to the nature of 3D printing, minor layer lines and small surface variations may be visible. These are normal characteristics of the manufacturing process and are part of the 3D-printed finish.

What's Included

1 × Grind to Brew Co. 30mm Blind Shaker Riser in your selected version

Blind shaker, dosing cup, grinder, coffee, portafilter, and other accessories shown in product photos are not included.

Compatibility Notice

Designed for use with the Baratza Encore ESP.

Please select the appropriate version based on the receiving cup or blind shaker you intend to use.

Grind to Brew Co. is an independent brand and is not affiliated with, endorsed by, or sponsored by Baratza. Baratza and Encore ESP are referenced solely to identify product compatibility.

Designed by Grind to Brew Co. — functional coffee accessories designed to fit the equipment they're made for.